Regent5 translates residential technology requirements into coordinated drawings, budgets and construction details. Working with architects, builders and owner representatives, we align low-voltage systems with electrical infrastructure and carry the design through installation, commissioning and a documented handover.
Early coordination resolves equipment rooms, conduit, fiber, lighting controls, shade pockets, speakers, cameras, gates and critical power while the project is still flexible—before framing turns design decisions into expensive field corrections.
Regent5 coordinates C10 electrical and C7 low-voltage scope under one technical team, aligning power, lighting controls, shades, security, network racks, UPS capacity and backup-power interfaces so systems are engineered together instead of handed off between disconnected trades.
During design development, Regent5 establishes performance requirements, protects essential infrastructure, phases optional features and helps value-engineer the technology scope without sacrificing architectural intent, serviceability or future expansion.
Regent5 coordinates low-voltage plans, risers, rack elevations, pathways, backboxes, power and PoE requirements, lighting and shade interfaces, security locations and network topology so framing, millwork, glazing, doors, mechanical and landscape trades have a clear technical set.
Field coordination verifies pathways, copper and fiber routes, equipment rooms, backing, shade conditions, speaker and display clearances, camera and Wi-Fi locations, labeling and trade interfaces while access is still available and corrections remain practical.
Commissioning brings networks, lighting, shades, security, AV, automation and resilient-power interfaces together through testing, programming, calibration, failover checks, punch-list closeout, as-builts, training and a defined long-term service path.
Regent5 supports architect-led estates, custom homes and major renovations across Northern California, with select projects in Santa Barbara, Los Angeles and Orange County. The technical plan adapts to multi-building estates, urban retrofits, hillside sites, coastal conditions and remote properties.
The exact drawing and coordination package depends on project scope, but these are recurring interfaces luxury residential teams need resolved before drywall and finish work.
Device locations for network, AV, automation, security, access, controls and related low-voltage systems coordinated against the architectural plan.
Speakers, sensors, cameras, access points, lighting details and other ceiling devices coordinated to preserve clean alignments and architectural intent.
Cat6A, fiber, conduit and pathway planning for main houses, guest houses, pool houses, detached offices, gates and outdoor areas, with spare capacity for multi-gigabit networking, PoE devices and future expansion.
Rack size, equipment access, ventilation, service clearance, dedicated power, UPS requirements, PoE switch budgets, network topology and heat load planned before millwork and MEP systems are locked.
Pathways, wall boxes, structural blocking and service access coordinated for displays, lifts, speakers, keypads, shades, security and future expansion.
Panel locations, circuit interfaces, keypad placement, shade pockets, power/data, blocking and control integration coordinated with lighting and interiors.
Camera sightlines, gate/intercom infrastructure, door-hardware interfaces, lock power, access devices, network requirements and backup-power priorities.
Multi-gigabit wired backbone, access-point locations, outdoor coverage, VLAN and network segmentation, firewall requirements, redundant internet and remote-management needs established before finishes.
Network, automation, gates, cameras, alarms and other critical technology loads identified so UPS systems, batteries, generators and load-management strategies support the actual estate priorities.
Final programming, cable and network verification, performance testing, calibration, punch-list completion, current drawings, labeling, system records, configuration backups, staff training and long-term service handoff.
Where we work.
Regent5 provides residential technology preconstruction, low-voltage engineering and C7 installation support for custom homes and estates across the San Francisco Bay Area and Northern California, including the Peninsula, San Francisco, South Bay, East Bay, Marin, Wine Country and Carmel/Monterey. Select projects also extend to Santa Barbara, Los Angeles and Orange County, with the same emphasis on coordinated infrastructure, documentation, commissioning and long-term service.
Schematic design or design development is ideal. Equipment rooms, pathways, ceiling conditions, lighting-control infrastructure, shade pockets, security locations, network topology and critical power are much easier to coordinate before permit drawings, framing and millwork are fixed.
The exact set varies by scope, but it commonly includes device plans, structured-wiring and fiber information, risers, rack elevations, pathway and conduit requirements, equipment locations, security and access-control points, shade and lighting-control interfaces, network coverage and coordination notes for other trades.
Future-ready design is less about predicting every device and more about preserving options: accessible conduit and pathways, Cat6A where copper is appropriate, fiber for distance and high-bandwidth links, spare rack and switch capacity, PoE headroom, serviceable equipment spaces, documented wiring and a network backbone that can evolve without reopening finished architecture.
It reduces handoffs where electrical and technology scope meet. Lighting-control panels, shade power, equipment-room circuits and cooling, security power, surge protection, UPS systems, generators, batteries and critical-load priorities can be coordinated by one technical team. Where a separate electrical engineer of record is engaged, Regent5 coordinates its installation and technology requirements against that engineered set.
Those interfaces should be assigned early and shown clearly enough that framing, millwork, glazing, drywall, electrical and low-voltage teams know what they own. Regent5 coordinates its technical requirements with the GC and design team before the finish packages make changes difficult.
Yes. Large residences often need fiber between structures, outdoor access points, gate and camera connectivity, multi-gigabit switching, network segmentation, redundant internet and equipment locations planned around distance, terrain and landscape. Those decisions belong in preconstruction, not after occupancy.
Commissioning verifies that cabling, networks, controls, lighting, shades, security, AV, automation and selected power interfaces operate together under real conditions. Depending on scope, it can include cable and network verification, wireless tuning, programming, calibration, internet-failover and backup-power checks, punch-list closeout and preparation for owner and staff training.
Closeout should leave the residence serviceable rather than dependent on installer memory. Depending on scope, that can include current as-builts, rack elevations, cable and device labeling, network and device records, configuration backups, programming and support access, owner-controlled account information, operating guidance, homeowner or household-staff training and a defined long-term service path.
Yes. The preconstruction role is collaborative by design. Regent5 reviews relevant architectural, interiors, reflected-ceiling, lighting, electrical and landscape sets; attends coordination meetings; resolves technical interfaces with the project team; and keeps low-voltage, electrical and integrated-system requirements aligned with architecture, interiors and construction sequencing.
The physical network should be designed with security and serviceability in mind from the start. That can include separate network segments for owner devices, guests, cameras, building systems and IoT equipment; firewall and remote-access requirements; secure equipment locations; redundant internet where appropriate; and owner-controlled credentials and documentation at closeout.
Regent5 serves complex residential projects across Northern California, including Atherton, Hillsborough, Woodside, Portola Valley, Los Altos Hills, Palo Alto, Menlo Park, Saratoga, Los Gatos and San Francisco; Marin communities including Ross and Tiburon; and Carmel, Pebble Beach and the Monterey Peninsula. Project fit depends on scope, schedule and service requirements.
Preconstruction budgeting should begin with performance and infrastructure rather than a premature shopping list. Regent5 can define system scope, identify non-deferrable pathways, wiring, equipment-room, network, security, lighting-control and power requirements, establish allowances for major system categories, and separate core infrastructure from options that can be phased or value-engineered as design decisions mature.
.svg)
© 2026 Regent5, LLC. CSLB C10 & C7 License 1033103.