Bollard speakers, line source arrays and subwoofers tuned to the landscape, with VIA lighting under native Lutron control.
Each outdoor area gets its own speakers and volume, so a quiet terrace and a full pool party can play at once, with the lighting planned along the same lines.
Pool Deck
Bollards and subwoofers set back from the water give even sound across the deck, with uplights and path lights in the same layout.
Lawn & Entertaining
A 12.0 Line Source Bollard carries music across open lawn for events, while subwoofers stay near the seating and uplights mark the edges.
Garden Paths
Pathfinder speakers sit low in planting beds for even, omnidirectional sound along walkways, next to low-glare path lights.
Covered Terrace
Ovation in-ceiling speakers serve covered patios, cabanas and pool houses, while hardscape and wall lights pick out steps and seating.
Regent5 sets each area as its own audio zone, then ties music and lighting scenes to the estate control system so the landscape stays the focus.
The cleanest outdoor systems are coordinated underground before hardscape and planting are complete.
Regent5 works with the landscape architect, electrical team and irrigation contractor to plan conduit, transformer locations, speaker zones, subwoofer locations, drainage, control gateways and serviceable connection points.
Coastal Source Lighting
ILLUMINATION
Layered architectural and landscape fixtures define circulation, depth, texture and focal points after sunset.
Coastal Source Audio
SOUND
Bollards, line-source arrays and distributed subwoofers create even musical coverage across exterior living areas.
Conduit and cable routes should avoid future planting conflicts and remain serviceable without disturbing finished hardscape.
Transformer, amplifier and network locations need ventilation, weather protection, power and access for long-term maintenance.
1000 Series Bollards
2-way and 3-way bollard speakers in directional and ellipse forms, with a modular design for each listening zone.
12.0 Line Source Bollard
A ground-plane line array with a variable waveguide that carries sound over long throws across lawns, pools and terraces.
Each product has a job: bollards for the main listening areas, the line source for distance, Pathfinder for paths and planting, and subwoofers for bass.
PATHFINDER
A discreet omnidirectional speaker for planting beds, hardscape and ceilings; eight can run on one Coastal Source amplifier channel.
BOLLARD SUBWOOFER
Bollard subwoofers, including the B1500, add even bass in an architectural form that blends into the landscape.
Speaker count, amplifier channels and cable routes are confirmed during design, before trenching and planting begin.
Get started.
Share a few project details and the Regent5 team will follow up on goals, scope and next steps.
Prefer to talk? Call
(650) 242-5745
An exterior system is more than fixtures and speakers. Layout, infrastructure, power, controls and serviceability determine how it performs over time.
2-way and 3-way architectural bollard speakers for full-range sound in each listening zone.
Line array design for long throws across lawns, pool decks and event space.
The B1500, bollard subwoofers and CUBE placed for even bass at moderate volume.
Low-profile speakers for planting, walls, hardscape and paths where a bollard will not fit.
Flush in-ceiling speakers for covered patios, cabanas and pool houses.
Coastal Source amplification sized to each zone, with volume set by area and use.
Outdoor music zones run from the home’s Savant, Control4 or Crestron system alongside Lutron lighting scenes.
Tunable white and color Lutron lighting outdoors through VIA fixtures and Native by Design.
Uplights, path lights and wall lights selected by beam, output and mounting condition.
Zones tuned on site, equipment mapped and connections left accessible for long-term service.
Where we work.
Regent5 designs, installs and supports Coastal Source outdoor audio and VIA lighting across the San Francisco Bay Area and Northern California. Select engagements extend to Santa Barbara, the Los Angeles area, and Orange County. Projects include estate gardens, patios, pools and landscape entertainment, from layout and tuning through Lutron integration and long-term service.
For a large yard, a distributed system works better than a few loud speakers. Regent5 lays out Coastal Source 1000 Series Bollards around each listening area, adds a 12.0 Line Source Bollard where sound must carry across a long lawn or pool deck, and places bollard subwoofers for bass. Each area runs as its own zone, so volume stays even and comfortable.
For estate landscapes, usually yes. Rock speakers suit small patios and background music. Coastal Source bollards are architectural loudspeakers in 2-way and 3-way models, with directional and ellipse forms and sealed Plug+Play connections, and they lift the drivers off the ground. Where a bollard does not fit, CONTOUR or Pathfinder speakers sit low in planting.
Spread the bass instead of turning one source up. Regent5 places several Coastal Source subwoofers, such as the B1500 bollard subwoofer or the compact CUBE, close to the seating areas and away from property lines. Each area then runs as its own zone at moderate volume, with levels set on site so the music sounds full where people sit.
Regent5 is a Coastal Source dealer based in San Carlos and designs, installs and services Coastal Source landscape audio and VIA lighting in San Francisco (Pacific Heights, Sea Cliff, Presidio Heights, Noe Valley and Russian Hill), the Peninsula, the North Bay, South Bay, and East Bay, Wine Country, and the Carmel and Monterey area.
The number of listening zones, the speaker and subwoofer count, the models chosen, cable runs and trenching, amplification, and how the system ties into lighting and control all drive the number. A figure without a landscape plan would mislead, so Regent5 prices from the drawings and walks through options at the Regent5 Showroom & Design Center in San Carlos.
Yes, with each part on its own control path. VIA lighting runs natively on Lutron, using Ketra and Rania technology through the Native by Design program. The speakers are driven by amplifiers that the home’s Savant, Control4 or Crestron system controls, so one scene on a keypad or app can set the outdoor lights and music together.