Regent5 is a California C10 electrical contractor for custom homes and estates, providing electrical design-build, 320A+ service planning, utility coordination, switchgear, lighting, EV charging, resilient power and troubleshooting in coordination with our C7 low-voltage team.
Complex homes need electrical infrastructure planned around both the architecture and the connected systems it serves. Regent5 coordinates service equipment, distribution, lighting, equipment rooms, technology loads, shade power, exterior systems and pathways early so the field installation follows a documented design instead of becoming a series of late compromises.
EV charging, heat pumps, induction cooking, pools, spas, elevators, lighting, batteries, generators and multiple structures can push a residence beyond conventional service capacity. Regent5 evaluates demand and plans 320A, 400A, 600A, 800A and 1000A+ infrastructure where appropriate, coordinating utility requirements, metering, switchgear, distribution and future capacity without promising utility approval or schedule.
Electrical faults in complex homes can cross system boundaries. Regent5 diagnoses circuits, breakers, panels, utility-power issues, lighting-control faults, equipment loads and backup-power interfaces while considering the automation, network and AV systems affected by them. Where power quality is part of the problem, the solution can extend to surge protection, conditioning, UPS and voltage-stabilization strategies.
Batteries, generators, solar, smart panels, load management, EV charging, surge protection and UPS should be designed as part of the electrical architecture rather than added as isolated products. Regent5 coordinates service capacity, transfer equipment, critical loads, controls and protection around the property's resilience goals.
Regent5 develops electrical and technology documentation in-house for the portions of work within our scope. Depending on the project, that can include plans, one-lines, panel schedules, lighting-control layouts, pathways, equipment-room plans, EV and backup-power interfaces, and coordination drawings used with the architect, engineer of record and builder.
The strongest projects keep design intent connected to field execution. Regent5 can coordinate electrical distribution, lighting control, shading, automation, networking, security, AV and resilient power from preconstruction through installation, programming and commissioning, reducing handoffs between otherwise separate trades.
Long-term ownership is easier when panels, circuits, equipment locations and pathways are labeled, documented and accessible. We plan for service and future expansion so additional EVs, batteries, lighting, automation or property structures can be evaluated without unnecessary disruption to finished architecture.
Regent5 coordinates electrical infrastructure with technology, lighting, backup power and automation so high-performance homes are designed as one system.
Main service, feeders, panels and distribution are coordinated around load, expansion and utility requirements.
Major electrical loads are evaluated early to support service sizing, backup-power design and future capacity.
Lighting circuits, control panels, drivers and fixture requirements are coordinated with architectural lighting design.
Generators, batteries, transfer equipment and critical-load priorities are integrated into the electrical plan.
EV charging, heaters, pools, pumps, kitchens and other major loads are coordinated with available capacity.
Dedicated circuits, cooling interfaces, surge protection and UPS support are coordinated for technology racks.
Landscape lighting, gates, heaters, outdoor kitchens and site equipment are coordinated with underground pathways and controls.
Surge protection and power-quality strategies help protect sensitive electronics and integrated systems.
Service upgrades and utility interfaces are coordinated around project schedule, available infrastructure and permit requirements.
Final verification aligns electrical systems with lighting, automation, backup power and technology requirements.
Where we work.
Regent5 provides residential electrical design-build for custom homes and estates throughout the San Francisco Bay Area, Marin, Napa and Sonoma, and the Monterey Peninsula. Utility conditions vary by jurisdiction; Palo Alto projects, for example, involve the city's municipal utility rather than PG&E. Select project coverage extends through Santa Barbara, Los Angeles and Orange County.
A service upgrade may be needed when planned loads such as EV charging, electric HVAC, induction cooking, pools, lighting, AV, batteries or other equipment exceed existing capacity or when the utility service no longer supports the project scope.
The ratings describe available service capacity, but the right size depends on calculated demand, utility rules, distribution design and future loads. Large estates may require multiple panels, larger services or more advanced distribution strategies.
Sometimes. Smart load-management systems can prioritize or shed flexible loads such as EV charging, water heating or selected appliances, potentially reducing peak demand. The strategy must still comply with code, equipment requirements and utility constraints.
Smart panels can provide circuit-level monitoring and selected control or load-management functions. They are useful when homeowners want better energy visibility, backup-power prioritization or flexible electrification planning.
Plan charger locations, conduit, circuit capacity, load management, utility limits and future vehicle count before concrete and finishes are complete. Large homes may benefit from multiple chargers or managed charging rather than simply adding maximum-size circuits.
Backup systems require transfer equipment, critical-load planning, controls, protection and coordination with solar or other generation. The electrical design should identify which loads must remain available and for how long.
All-electric homes may need capacity for heat pumps, induction cooking, water heating, EV charging, pool equipment and other large loads. Early demand calculations and load-management planning help avoid late-stage redesign.
Yes. Reserve physical space, conduit, panel capacity and interconnection pathways so solar, storage and bidirectional vehicle equipment can be added later without rebuilding the service architecture.
Design-build coordination can reduce handoffs between engineering, field installation and technology systems. It is especially useful where lighting control, shades, AV, security, backup power and automation intersect with electrical work.
During design development, before utility service, switchgear, panel locations, generator or battery equipment, lighting control and major appliance loads are fixed.
Often yes. Upgrades can include service equipment, panels, surge protection, EV charging, generators, batteries, lighting controls and selective rewiring, depending on existing conditions and access.
Whole-home surge protection, proper grounding, equipment-specific protection and power-quality planning help protect sensitive automation, networking, AV and appliance electronics from damaging electrical events.
.svg)
© 2026 Regent5, LLC. CSLB C10 & C7 License 1033103.