2N Intercom, Gate Entry & Access Control

Regent5 designs, installs, integrates, commissions, and services 2N IP intercom and access systems for Bay Area homes and estates. We coordinate entry stations, gate operators, mobile credentials, networking, surveillance, automation, conduit, and power so the entire entry experience is engineered as one system.

A Primary Entry With Presence: 2N IP Style

At a principal pedestrian or vehicle entry, 2N IP Style combines a large touch display, high-resolution video, modern credential options, and weather- and impact-resistant construction in a purpose-built IP intercom. Regent5 coordinates mounting, network and PoE, gate release, call routing, and camera sightlines so the station works as part of the architecture rather than an afterthought.

Learn More

Modular Entry Design: 2N IP Verso 2.0

2N IP Verso 2.0 is designed for entries that need a tailored mix of video, calling, keypad, RFID, touch display, or other access modules. That modular architecture is especially useful when the pedestrian gate, service entry, front door, and staff entrance each need a different experience while remaining part of one coordinated property access strategy.

Learn More

Rugged Perimeter Entries: 2N IP Force 2.0

For exposed driveway gates, delivery entrances, service areas, and other demanding perimeter locations, 2N IP Force 2.0 brings current-generation video intercom capabilities into a rugged enclosure. Regent5 designs the surrounding pedestal or wall location, network path, PoE, gate controls, drainage, and camera view so the hardware is supported by durable infrastructure.

Learn More

Integration With Savant, Control4 and Crestron

2N intercoms can be coordinated with whole-home automation platforms such as Savant, Control4, and Crestron so gate calls, door release, cameras, and entry workflows are presented through the broader control system where supported. Regent5 designs the network, relay logic, video paths, call behavior, and user experience around the specific platform and 2N hardware selected for the project.

Learn More

Access Control Beyond the Intercom

2N Access Unit products extend the same ecosystem to doors and gates that need controlled entry without a full video intercom. Mobile credentials, RFID, PIN or other supported methods can be selected by location, while schedules, users, and permissions are planned around residents, staff, vendors, service teams, and one-time visitors.

Learn More

Gate, Security and Automation Integration

A gate station is only one part of the entry system. Regent5 can coordinate 2N with supported gate operators, door hardware, surveillance, network infrastructure, and home-control platforms such as Control4 where the project architecture supports the integration. The goal is a predictable visitor, resident, and staff workflow rather than a collection of disconnected devices.

Learn More

Estate-Wide Design, Commissioning and Service

Large properties may have a main gate, pedestrian gate, service entrance, guest house, pool house, and multiple occupied buildings. Regent5 designs the network, fiber or copper pathways, power, relay logic, addressing, documentation, and service strategy as one estate system for projects across the Peninsula, South Bay, San Francisco, and other Regent5 service areas.

Learn More

2N Products and Project Capabilities

A 2N project can include the entry station, credentials, call routing, access control, network infrastructure, gate release, automation, and long-term service. Regent5 selects the right pieces for the property rather than forcing every entrance into the same configuration.

2N IP Style

Premium touch-display video intercom for a primary gate or architectural entry, coordinated with network, PoE, calling, credentials, and gate release.

2N IP Verso 2.0

Modular video intercom platform for entries that need a tailored combination of calling, camera, keypad, reader, touch, or access modules.

2N IP Force 2.0

Rugged current-generation video intercom for exposed perimeter, driveway, delivery, and service-entry locations.

2N Access Units

Access Unit 2.0 and Access Unit M options for controlled doors and gates that need credentials without a full intercom experience.

Savant, Control4 and Crestron Integration

Project-specific integration of 2N intercom, gate release, video, and entry workflows into supported Savant, Control4, and Crestron environments.

WaveKey Mobile Credentials

Bluetooth-based mobile access for supported 2N readers and intercoms, reducing reliance on physical cards or fobs where appropriate.

Gate and Door Release

Relay, operator, lock, request-to-exit, and door-contact coordination designed around the actual gate or door hardware.

Indoor Answering and Call Routing

Calls can be designed around supported indoor answering stations, mobile devices, and project-specific routing so the right people receive the right entrance calls.

Network, PoE and Cabling

Structured cabling, fiber where distances demand it, surge protection, PoE budgeting, switching, addressing, and resilient network paths planned for the entry system.

System Takeovers and Service

Existing 2N systems can be assessed for ownership, network health, configuration, gate interfaces, firmware, call routing, documentation, and ongoing support.

2N Intercom and Gate Entry FAQs

How do I find a 2N intercom installer near me?

Regent5 designs, installs, integrates, commissions, and services 2N intercom and access systems for homes and estates across the San Francisco Bay Area and other Regent5 service areas. A proper project includes the intercom, gate or door hardware interface, network, PoE, call routing, credentials, documentation, and service plan—not just mounting the station.

Can 2N replace my old DoorKing or analog gate intercom?

Often, yes, but the existing gate operator, locks, cabling, pedestal, power, network path, and call requirements should be surveyed first. An older analog or telephone-based entry system may require new Cat6, fiber, PoE, relays, or enclosure work. Regent5 can evaluate what can be reused and what should be modernized.

Which 2N model is right for my gate or front entry?

The right model depends on the architecture, exposure, desired user interface, credential types, number of call buttons, and integration requirements. IP Style suits a premium primary entry, IP Verso 2.0 is highly modular, and IP Force 2.0 is aimed at rugged locations. Regent5 selects the station after reviewing the actual entry condition.

Does 2N integrate with Savant, Control4 and Crestron?

Yes, 2N can be integrated into broader Savant, Control4, and Crestron systems when the selected devices and supported interfaces fit the project. Typical goals include presenting gate calls, viewing entry cameras, triggering door or gate release, and coordinating entry events with the rest of the home. Regent5 confirms the exact integration path and supported functions before programming.

What is 2N WaveKey and how does mobile access work?

WaveKey is 2N's Bluetooth-based mobile credential technology for supported access readers and intercoms. It allows a compatible smartphone to act as an access credential instead of relying only on a physical card or fob. The final experience depends on the selected device, mobile configuration, permissions, and access-control design.

How are 2N stations wired and powered?

Many 2N IP intercom deployments use Ethernet and Power over Ethernet, but the full entry still may need separate wiring for the gate operator, lock, door contacts, request-to-exit devices, auxiliary relays, cameras, or other controls. Long estate distances may call for fiber and local power rather than a simple copper run.

What if the gate intercom stops calling our phones?

Start by checking whether the intercom is online and whether local gate release still works. Phone-calling failures can involve the internet connection, network rules, account settings, mobile permissions, call-routing configuration, or device settings. Regent5 can troubleshoot the network, intercom, and automation path together instead of treating them as unrelated systems.

Can one 2N system cover multiple gates and buildings?

Yes. Multi-entry properties can be designed with different intercoms or access readers at the main gate, pedestrian gate, service entrance, front door, and secondary buildings. The important work is the underlying network, fiber or copper distances, power, permissions, naming, call routing, and documentation across the estate.

We bought a house with a 2N intercom already installed. Can Regent5 take it over?

Yes. A takeover typically starts with documenting the installed models, network addressing, account ownership, credentials, call destinations, gate or door interfaces, and current configuration. Regent5 can then recommend cleanup, updates, integration work, and an ongoing service approach based on the condition of the system.

How much does a 2N intercom and gate-entry project cost?

Project cost depends on the 2N station and modules, number of entries, gate or door hardware, pedestal or architectural mounting, trenching and conduit, network and fiber work, PoE switching, access credentials, automation integration, programming, commissioning, and service scope. A site survey and system design are the right way to establish a meaningful installed price.

What should be planned for 2N during new construction or a gate rebuild?

Plan the station location and height, camera view, pedestal or wall detail, conduit, Ethernet or fiber, local power if needed, PoE budget, gate-controller interface, door hardware, drainage, surge protection, and service access before finishes are complete. Early coordination prevents an otherwise premium entry from being compromised by missing infrastructure.

Can 2N gate calls and cameras appear on home automation touchscreens?

In supported Savant, Control4, and Crestron designs, 2N entry video, calls, and gate or door release can be coordinated with the home's control interfaces. The exact experience depends on the 2N model, automation platform, network architecture, and supported integration method, so Regent5 validates those details during system design.

Starting a project, or need help with planning one?

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.