Commercial Lighting Control, Lutron Athena, Ketra & DMX

Lutron Athena, Ketra and DMX lighting control for hospitality, restaurants, workplaces and venues, programmed and commissioned.

Scene-Based Lighting for Real Operations

Opening, daytime, evening, event, cleaning and after-hours scenes can simplify a complex lighting system into repeatable staff workflows while preserving the lighting designer’s intent.

→

Lutron Athena for Commercial Spaces

Athena can coordinate architectural lighting, occupancy and daylight response across hospitality and workplace environments. Regent5 designs the control scope around room functions, schedules, fixture requirements and the electrical lighting plan.

→

Tunable White and Ketra Lighting

Tunable lighting can support hospitality atmosphere, display environments and changing daytime conditions. Fixture compatibility, control zones and commissioning are coordinated together so color and dimming performance remain consistent.

→

DMX and Color-⁠Changing Lighting

Bars, clubs, event spaces and architectural features may use DMX or color-changing fixtures. Regent5 coordinates gateways, addressing, scene recall and the interface between architectural and entertainment lighting.

→

Occupancy, Daylighting and Energy Logic

Occupancy and daylight controls can reduce unnecessary use while respecting guest experience and operational needs. Sensor placement, timeouts and response logic are coordinated with the lighting plan rather than added generically.

→

AV, Automation and Building-⁠System Integration

Meeting modes, event scenes and building schedules can coordinate lighting with AV, automation and supported building-system interfaces. Integration responsibilities are defined during design so programming and commissioning have a clear scope.

→

Get started.

Starting a project, or need help with planning one?

Share a few project details and the Regent5 team will follow up on goals, scope and next steps.

Prefer to talk? Call

(650) 242-5745

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Programming, Commissioning and Handoff

Scenes, fades, dimming behavior, schedules, sensor logic and integration points are commissioned with the design and operations teams, then documented and trained so the installed system performs as intended after opening.

→

Commercial Lighting-⁠Control Scope

The exact control package depends on the project and on whether the lighting is designed by Regent5's in-house lighting designers or by an outside lighting designer, but these are recurring interfaces Regent5 coordinates from design through turnover.

Control Narrative & Scene Matrix

Defines operating modes, staff workflows, schedules, priorities and scene intent so control behavior is clear before programming begins.

Lutron Athena Architecture

Control panels, processors, keypads, sensors, fixture interfaces and network requirements coordinated against the lighting and electrical plans.

Tunable-White & Ketra Coordination

Fixture compatibility, control zones, color-temperature intent, dimming behavior and commissioning requirements coordinated as one system.

DMX Addressing & Gateways

DMX universes, fixture addressing, gateways, control interfaces and handoff boundaries planned for architectural, decorative or entertainment lighting.

Occupancy & Daylight Sensors

Sensor locations, timeouts and daylight response planned around real room use, guest experience and the lighting designer’s intent.

AV & Building-System Integration

Meeting, event and operating modes coordinated with supported AV, automation and building-system interfaces with clear responsibility boundaries.

Panels, Circuits & Electrical Interfaces

Panel locations, circuiting, control wiring, normal and emergency power interfaces, and service access coordinated with the electrical scope.

Network & Control Backbone

Network drops, gateways, IP addressing, control processors and remote-management requirements planned for serviceability and reliable operation.

Programming & Commissioning

Scenes, fades, schedules, sensor behavior, dimming and integration points programmed and tested under actual operating conditions.

Documentation & Staff Handoff

Final scene schedules, control documentation, labeling, system records, staff training and service information prepared for ongoing operation.

Where we work.

Commercial Lighting Control, Athena & DMX Integration

Regent5 supports commercial lighting-control projects across the San Francisco Bay Area and Northern California, including hospitality, workplace, restaurant and entertainment environments. Select engagements extend to Santa Barbara, the Los Angeles area, and Orange County. Project scope can include electrical coordination, Lutron Athena, tunable-white and Ketra lighting, DMX, sensor control, AV interfaces, programming, commissioning and long-term service.

Commercial Lighting Control & DMX FAQs

What is Lutron Athena and when is it a good fit?

Lutron Athena is a commercial lighting-control platform designed to coordinate lighting, controls, sensors and schedules across spaces and projects. It can be a strong fit when a project needs centralized scene control, flexible room behavior, daylight or occupancy response, and a documented control architecture that can be commissioned and serviced. Restaurants, hospitality venues, workplaces, event spaces and other environments with changing operating modes can benefit from this kind of scene-based control.

Can Lutron Athena control Ketra and tunable-white lighting?

Yes, compatible tunable-white and Ketra lighting can be incorporated into an Athena-based design when the fixture and control architecture support it. Regent5 confirms fixture compatibility, control zones, scene intent and commissioning requirements during design rather than treating tunable lighting as a separate add-on.

When is DMX appropriate for architectural or commercial lighting?

DMX is useful when a project includes color-changing fixtures, dynamic architectural features, decorative lighting or entertainment-style control that requires detailed channel addressing and repeatable scene recall. The DMX scope should be coordinated with the architectural lighting and control systems so staff are not left with disconnected control layers.

Who provides commercial lighting control and DMX work in the Bay Area?

Regent5 supports commercial lighting-control projects across the San Francisco Bay Area and Northern California. Project fit depends on scope, schedule, commissioning needs and long-term service requirements.

How much does a commercial lighting control system cost?

It is a fair question, and the answer depends on how the spaces operate. Cost is driven by the number of spaces and scenes, tunable-white or Ketra fixtures, DMX scope, occupancy and daylight sensors, panels and gateways, AV or building-management integration, and programming and commissioning. A number given without drawings or a site visit would mislead. Visit the Regent5 Showroom & Design Center in San Carlos or book a consultation.

Can lighting control integrate with AV and building-⁠management systems?

Yes, where supported interfaces are available. Meeting modes, event scenes, schedules and selected system states can coordinate with AV, automation or building-management systems. The integration points, ownership and failure behavior should be documented during design so commissioning has a clear testable scope.