Just Bought a Home with Smart Home Technology? Start Here

A guide for new owners to inherited lighting control, automation, Wi-Fi, cameras and gate entry: what to check, what to transfer and what to fix before you move in.

Start with an Inventory, Not a Replacement

If you just bought a home with a Control4, Savant, Crestron or Lutron system and no documentation, the first visit is an inventory. Regent5 walks the house and the equipment closet, identifies each system and its age, tests what still works and finds what the previous owner removed or locked. You receive a written list of what you have, what is worth keeping, what needs attention and what each system depends on. Most inherited systems are partly sound, so the decision is rarely all or nothing.

Smart home and network system takeover

Network and Internet Come First

The most common call from a new owner is a system that went offline at closing. Sellers cancel their internet service and often take the router with them, and every app-controlled system in the house was set up on that network. Lighting, automation, cameras and intercoms usually still work locally; they lost their connection, not their function. Regent5 restores the internet handoff, rebuilds or takes ownership of the network, checks Wi-Fi coverage room by room and reconnects each system to it.

Home Wi-Fi and network installation

Lighting Control You May Have Inherited

Engraved keypads beside the doors usually mean a central lighting system. Lutron HomeWorks and RadioRA systems are common in Bay Area homes, and older HomeWorks Illumination and QS systems can often move to HomeWorks QSX while keeping much of the existing wiring. Vantage systems are also common and can be serviced and updated. LiteTouch is the exception: Savant discontinued it in 2015, new parts are no longer made, and a planned replacement around the existing wiring is the safer path than repair.

Lutron legacy system upgrades

Control4, Savant and Crestron Left by the Previous Owner

Automation systems are registered to an owner and a dealer, so access does not pass with the deed. Control4 owners can move their account to a new dealer from the Control4 app, and a dealer can register the system to you if the seller's account is not handed over. Savant directs new owners to work through a Savant dealer to gain access. Crestron programming is custom work held by the installing dealer, so recovering or rebuilding the program is part of the takeover. If a controller, remote or touch panel left with the seller, Regent5 identifies what is missing before anything is replaced.

Control4 dealer and serviceSavant dealer and service

Accounts and Passwords to Collect at Closing

Ask the seller for these in writing before closing: the integrator who installed and serviced each system; app and account logins for lighting, automation, cameras and the network; controller and processor passwords; the internet provider account and router login; camera recorder logins; the alarm monitoring company and account number; and gate, door and garage codes. After you take over, change every password and remove the previous owner's access from each app. Anything the seller cannot provide can usually be recovered or reset on site.

Request Support

What to Do Before You Move In

Work in this order, because each step depends on the one before it. Network first: internet service, the router and Wi-Fi coverage. Then security and entry: cameras, alarm monitoring, the gate and door access, with every old credential removed. Then lighting and shades, then audio and video, then power: the electrical panel, backup power and any battery system. Work that opens walls or ceilings, such as new access points, cameras or speaker wiring, is easiest while the house is still empty.

Home security camera installationVideo intercom and gate entry

Get started.

Starting a project, or need help with planning one?

Share a few project details and the Regent5 team will follow up on goals, scope and next steps.

Prefer to talk? Call

(650) 242-5745

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

What Shapes the Scope of an Inherited System

The scope of a takeover depends on how many systems are involved, whether passwords and programming can be recovered or must be rebuilt, the age of the equipment, what the seller removed and how much you want changed before moving in. After the first visit you receive written findings and a scope for each system. Regent5 is a C10 and C7 licensed contractor doing this work for homes in Atherton, Hillsborough, Los Altos Hills and San Francisco and across the Bay Area, and the same team services the systems after you move in.

Regent5 Showroom & Design Center

Inherited Systems at a Glance: What You See and What It Means

Ten systems new owners most often find, how to recognize each one and the usual next step.

Lutron HomeWorks

Engraved keypads and dimming panels in a closet. Usually worth keeping; older systems can move to HomeWorks QSX.

Lutron RadioRA

Wireless keypads and dimmers with a main repeater. RadioRA 2 can be planned into a RadioRA 3 upgrade.

LiteTouch

Discontinued in 2015 with no new parts. Plan a replacement around the existing wiring.

Vantage

Keypads and a central controller. Serviced and updated through an authorized Vantage dealer.

Control4

Touch panels, remotes and a controller in the rack. The account and dealer transfer comes first.

Savant

Savant remotes and app with a host in the rack. Access is restored through a Savant dealer.

Crestron

Touch panels and a processor. Whether the program file can be recovered shapes the takeover.

Sonos

Speakers grouped in the Sonos app. Usually reset and set up under your own account.

UniFi or Luxul Network

Access points on the ceilings and a switch in the rack. Keep the cabling; review the equipment and its ownership.

DoorKing Gate Entry

A telephone-entry panel at the gate. Often replaced with an IP video intercom on the same gate hardware.

Where we work.

New Homeowner Technology Help across the Bay Area

Regent5 helps new owners take over and update inherited technology in homes across San Francisco, the Peninsula, the South Bay, the East Bay, Marin, Wine Country and the Monterey Peninsula, from its base in San Carlos. Select engagements extend to Santa Barbara, the Los Angeles area, and Orange County.

New Homeowner Smart Home FAQs

We just bought a house with a smart home system and no passwords. What should we do first?

Ask the seller for the installer's name and every account login, then arrange an on-site inventory before changing anything. Resetting equipment blindly can erase programming that took weeks to build. An inventory identifies each system, recovers what can be recovered and shows which systems need a dealer transfer.

The previous owner cancelled the internet or took the router, and now the system is offline. Can it be fixed?

Usually. Lighting, automation and cameras often stop responding to apps because the network they were set up on is gone, not because the equipment failed. Once the internet service and network are restored or rebuilt, each system is reconnected and tested. A missing controller or processor is identified and planned for at the same time.

Is an inherited smart home system worth keeping?

Often, in part. Wiring, keypads and Lutron dimming panels usually have years of life left, while older controllers, touch panels and network equipment are the parts most often replaced. Discontinued platforms such as LiteTouch are better replaced on a plan than repaired. The inventory answers the question system by system.

Can Regent5 take over a system another company installed?

Yes. Regent5 takes over Lutron, Control4, Savant, Crestron and Vantage systems and the networks they run on, including systems whose original installer has closed or no longer services them. Where a manufacturer requires a dealer transfer, Regent5 completes it with you.

How much does it cost to take over an existing smart home system?

It depends on the number of systems, whether passwords and programming can be recovered, the age of the equipment and what the seller removed. Regent5 starts with an on-site inventory and then provides a written scope for each system, so you can decide what to keep, fix or replace before committing to the work.

Can one company handle the electrical, network, security and automation in a home we just bought?

Yes. Regent5 holds both C10 electrical and C7 low-voltage licenses (CSLB 1033103), so panel work, backup power, wiring, the network, cameras, gate entry and automation are planned and installed by one team and serviced by the same team after you move in.