Regent5 coordinates electrical and low-voltage systems for Palo Alto renovations and custom homes, including City of Palo Alto Utilities service planning, automation, networking, AV, security and resilient power.
Regent5 is the electrical contractor and the smart home installer on Palo Alto projects, with one team for the service, the circuits and the low-voltage systems. Electric service in Palo Alto comes from City of Palo Alto Utilities (CPAU), not PG&E, and its process is its own: a new connection or service upgrade starts with a utility service application, sent with the building submittal when a permit is needed; CPAU's Utilities Electrical Engineering sets the connection charges after plans are approved; and CPAU does not inspect or install until those charges are paid. Regent5 prepares the load figures and service drawings for that application and sequences heat pumps, induction cooking, EV charging and batteries around the CPAU timeline, so electrification does not stall the build. Homeowners looking for smart home electricians near Palo Alto reach the same San Carlos team that also wires and programs the automation.
Regent5 designs, wires, programs and services Savant smart homes in Palo Alto, and is an authorized Savant dealer. A design-build scope means one team draws the electrical and low-voltage plan, installs it and writes the program, so keypads, shades, climate, audio and video land where the drawings put them. Savant suits Palo Alto households that want one app, individual user profiles and energy visibility; Savant Power Modules show circuit-level use in the main panel, which helps when a home is moving to all-electric service under CPAU and the service size has to be planned rather than guessed. Regent5 also takes over existing systems, documents them and brings them up to date. A Palo Alto home with a dedicated theater and Savant control shows a compact theater and game room run from one Savant system.
Regent5 designs and installs the low-voltage infrastructure in Palo Alto homes: Cat6A and fiber to every room that needs it, structured wiring to a central rack, conduit for future runs, and indoor and outdoor Wi-Fi from Ubiquiti, Ruckus or Cisco Meraki. Palo Alto has its own city-owned internet service, Palo Alto Fiber, offering symmetrical gigabit service where it is available, alongside the usual providers. Regent5 confirms what serves the address during design, plans where the service enters the house and where the router and switching live, and can bring in a second provider as a backup. In older Palo Alto homes being renovated in place, the wiring plan is drawn around the rooms that will be opened, with wireless devices and fiber pathways covering the rest. Every run is labeled, tested and documented at handoff, so the next technician can read the system without guessing.
Regent5 coordinates dedicated theaters, listening rooms, architectural speakers, distributed audio, displays and projection with acoustics, equipment racks, networking, control and interior design so entertainment systems are planned as part of the residence rather than added after finishes.
Regent5 designs and installs Lutron Palladiom shades in Palo Alto homes, and is a certified Lutron dealer for HomeWorks, RadioRA 3, Ketra, Rania and Lumaris, and for Lutron motorized shades and drapery, including Sivoia QS, Palladiom and Triathlon. Palladiom brackets and hembars are milled from solid aluminum or brass and hand-finished, and the shades come wired for new construction or wire-free on batteries Lutron rates at three to five years. On a Palo Alto new build or full renovation, wired shades need power and control at each window, and those circuits belong in the electrical drawings that go with the CPAU utility service application and the building submittal, so Regent5 places them at design rather than adding them later. Fabrics range from light-filtering to blackout, and the shades join the Lutron lighting scenes on the same keypads. Lutron controls are also part of a Palo Alto hills home with pool audio and cameras.
Backup power works best when critical loads and electrification goals are defined early. Regent5 can coordinate battery storage, standby generators, UPS systems, smart electrical panels and technology loads with the electrical design for predictable operation and recovery during utility interruptions.
Get started.
Share a few project details and the Regent5 team will follow up on goals, scope and next steps.
Prefer to talk? Call
(650) 242-5745
Regent5 works with homeowners, architects, builders, designers and owners' representatives to coordinate electrical and low-voltage pathways, device locations, equipment space, network architecture and commissioning before construction details become expensive to change.
Palo Alto projects benefit from coordinating City of Palo Alto Utilities requirements, electrification, technology infrastructure and architectural systems before construction details are fixed.
Residential service capacity and utility coordination planned against City of Palo Alto Utilities requirements rather than PG&E electric-service rules.
Service, panels, switchgear, EV charging, heat-pump loads and future battery or generator interfaces coordinated from the project load plan.
Lighting-control panels, keypads, tunable lighting, shade pockets, power and control interfaces coordinated with interiors and glazing.
Wired backbones, fiber where appropriate, managed switching, indoor and outdoor Wi-Fi, VLANs, UPS support and remote-management architecture.
Lighting, shades, climate, AV, entry and selected security functions coordinated through a professional control platform selected around the home.
Dedicated theaters, listening rooms, distributed audio, architectural speakers and displays coordinated with acoustics, networking and interior design.
Video intercoms, cameras, controlled doors, access credentials and network video coordinated with the property's power and network infrastructure.
Critical household and technology loads prioritized so batteries, generators, UPS systems and smart panels support predictable operation during outages.
Rack space, dedicated power, cooling, service clearance, network switching and pathways coordinated before millwork and mechanical layouts are locked.
Programming, testing, documentation, configuration backups, homeowner training and a defined support path keep the finished connected home serviceable.
Where we work.
Regent5 serves Palo Alto custom homes, renovations and electrification projects with electrical and low-voltage design, automation, lighting and shades, networking, AV, security and resilient power, including coordination with City of Palo Alto Utilities requirements.
Before service capacity, equipment rooms, conduit, ceiling details, lighting-control locations and device positions are finalized. Early coordination lets electrical, low-voltage, network, AV and automation requirements become part of the architectural plan instead of late construction changes.
No. City of Palo Alto Utilities owns and operates the local electric utility and publishes its own electric-service requirements. Regent5 can coordinate residential service-capacity planning and related electrical work with the applicable CPAU pathway for the project.
Yes. Scope can include service planning, panels, switchgear, EV charging, battery and generator interfaces, UPS systems and critical technology loads. Final service size and utility requirements depend on the load study, existing infrastructure and any engineering required for the property.
The network should be designed from room use, building materials, device density and any detached structures. Regent5 can coordinate wired backbones, enterprise switching, indoor and outdoor Wi-Fi, VLANs, UPS support and remote-management architecture.
Yes. A professional automation platform can coordinate these systems while preserving native applications and service tools for specialized functions. Platform selection depends on project scale, interoperability, owner preferences and long-term support goals.
Yes. Regent5 can coordinate dedicated cinemas, high-performance listening rooms, architectural speakers, distributed audio, displays and equipment racks with acoustics, networking, control and interior-design requirements.
Yes. Regent5 can audit inherited automation, lighting, AV, networking, surveillance, access and electrical infrastructure, document what remains serviceable, and develop a phased repair or modernization plan with ongoing support options.
Yes. Cameras, intercoms, controlled entry and network video can share the home's power, network and automation infrastructure while retaining dedicated security controls and service tools where appropriate.
The project should identify which household and technology systems need continuous operation, short-term ride-through or long-duration backup. That load hierarchy then informs battery, generator, UPS and load-management design.
Yes. Regent5 can coordinate electrical and low-voltage pathways, equipment spaces, lighting and shade interfaces, network architecture, security, resilient power and commissioning with the wider project team.
Yes. Regent5 supports completed and inherited systems with troubleshooting, upgrades, documentation, remote-management options and ongoing service. Response and support scope depend on the service arrangement and issue priority.
Preconstruction budgeting should begin with performance and infrastructure rather than a premature shopping list. Regent5 can define system scope, identify non-deferrable pathways, wiring, equipment-room, network, security, lighting-control and power requirements, establish allowances for major system categories, and separate core infrastructure from options that can be phased or value-engineered as design decisions mature.
.svg)
© 2026 Regent5, LLC. CSLB C10 & C7 License 1033103.